• Home
  • About Us
  • Products
    • Wireless
    • 3G/4G Routers
    • Switches
    • ADSL Modems
    • Lan Adapters
    • KVM Switches
    • Fiber Products
    • LAN Cables
    • Discontinued products
  • Support
  • Contact us

MT-WR960ND

High Power Wireless Outdoor Router
1000mW

 

 

  • Description
  • Features
  • Specification
  • Downloads

Description

The MT-WR960ND 2.4GHz High Power Wireless Outdoor CPE is dedicated to long distance wireless network solutions. It integrates the functions of a Wireless Access Point, WISP Client, high gain antenna and weatherproof enclosure. It features 9dBi high gain antenna, high output power and high RX sensitivity can significantly extend the transmission range to deliver a more stable wireless connection. Complies with IEEE 802.11b/gn, MT-WR960ND creates an wireless network up to 150Mbps, making it great for Internet surfing and files exchange.

The MT-WR960ND is designed to work in harsh outdoor environment. Built with outdoor weatherproof enclosure and high durable of temperature (-30°C~70°C) hardware inside, the AP could work in some place with extreme bad weather conditions

Supports AP Client, Client Router, Bridge, Repeater, AP and Gateway operation modes to enable various wireless applications to give users a more dynamic and comprehensive experience when using their AP. Especially in AP Client Router Mode for WISP CPE, the AP will behave as a client of the Wireless Internet Service Provider (WISP). However, router functions are added between the wireless WAN side and the Ethernet LAN side. Therefore, the WISP subscriber can easily share the WISP connection with only a simple switch.

Features

  • Complies with IEEE802.11b/g Draft n, IEEE802.3, IEEE802.3u standards
  • Support advanced 1 x 1 Technology with up to 150Mbps downstream and upstream
  • Complies with 2.4GHz IEEE802.11n and IEEE802.11b/g standards
  • Low Noise Amplifier(LNA) support
  • Support 20MHz and 40 MHz bandwidth
  • Operation mode: Bridge, Gateway,Ethernet Converter
  • Wireless mode: AP, Client, WDS,AP+Client
  • DHCP Server/Client
  • Virtual DMZ, Port Forwarding
  • Firewall, IP/Port/MAC filtering
  • Wireless users access control
  • Wireless security – 64/128bit WEP, WPA TKIP, WPA2 AE2, 802.1x
  • Support DHCP client, static IP, PPPoE,PPTP and L2TP for WAN connection
  • Software WPS function

Specification

 
Wireless LAN Standard IEEE 802.11b/g/n
Operation Mode Bridge
Gateway
Ethernet Converter
Data Rate 802.11b: 11, 5.5, 2 and 1 Mbps with auto-rate fall back
802.11g: 54, 48, 36, 24, 18, 12, 9 & 6Mbps
802.11n(20MHz): up to 72Mbps
802.11n(40MHz): up to 150Mbps
Connector One RJ-45 port for LAN
One RJ-45 port for WAN
Reset to default button
Output Power(Typical) 802.11a: up to 30 ± 1 dBm
802.11b: up to 26 ± 1 dBm
802.11g: up to 27 ± 1 dBm
802.11n: up to 22 ± 1 dBm
Sensitivity -93dBm @ 802.11b
-91dBm @ 802.11g
-89dBm @ 802.11n
Frequency Band 2.400GHz ~ 2.484GHz
Power requirement 12V DC
Wireless Mode AP
AP+Client
Client
WDS
Operation Temperature Operation: 0°C ~ 60°C
Security 64/128bit WEP
WPA(TKIP with IEEE 802.1x)
WPA2(AES with IEEE 802.1x)
Storage Humidity 10% ~ 90% (Non-condensing)
Media Access Control CSMA/CA

 Document

  • Data Sheet

 Picture

 Downlaods

Firmware

Support | Contact us
Copyright © 2015 MT-LINK Technologies Co. Ltd. All rights reserved

Sign in to your account

Account Login
Forgot your password?