Fast Ethernet Media converter
Multi Mode Dual fiber
Description
The MT-210CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MT-210CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MT-210CS supports long wave (LX) laser specification at a full wire speed forwarding rate.
Features
- UTP 1 port (RJ-45 connector)
- Support Auto-MDIX & Auto-negotiation
- Fault propagation capability
- 100Base-FX fiber 1 port (ST connector / Multi Mode )
- Up to 415 meters (1360 ft.) for MMF 50/125um or 62.5/125um optic cables on half-duplex operation
- Up to 2, 5km (1.24, 3.1 mi.) for MMF 50/125um or 62.5/125um optic cables on full-duplex operation
Specification:
Standards | IEEE 802.3u 100Base-T/100Base-TX and 100Base-FX |
Media support | 10Base-T EIA/TIA 568 Cat3,4,5,5e or 6 UTP/STP 100Base-TX EIA/TIA 568 Cat5,5e or 6UTP/STP 100Base-FX Multi-mode 50/125um & 62.5/125um MMF 100Base-FX Single-mode 9/125um SMF |
Distances support | Multi-mode fiber:415 meters for half-duplex Multi-mode fiber:5km for full duplex |
Wavelength | 1310/1550nm Multi-mode |
Data Transfer Rate | 100Mbps/10Mbps |
LED indicators | System-power Twisted pair port-Link/Activity, Speed and FDX/Col Fiber port-Link/Activity & FDX LEDs |
Temperature | 0 to 45degrees Celsius(Operating)/-20 to 90degrees Celsius(Storage) |
Humidity | 10% to 90%(Non-condensing) |
Power Consumption | 3.4 Watts(max) |
Power Requirement | 5V DC 1A |
Dimension | 75(W) x 22(H) x 102(L)mm |
Weight | 230g (No power adapter) |