WDM Fast Ethernet Media Converter
Single Mode Single Fiber
Range: 20km
Description
The MT-212GS is a media converter designed to convert 1000BASE-LX/LH fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-LX/LH standards, the -212GS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MT-212GS supports long wave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data.
Features
- Works at 1000Mbps in Full-Duplex mode for both TX port and FX port
- Supports auto MID/MID-X for TX port
- Provides switch configuration of Force /Auto transfer mode for FX port.
- Extends fiber distance up to 20km
- Easy-to-view LED indicators provide status to monitor network activity easily
- External power supply
Specification:
Standards and Protocols | IEEE 802.3, IEEE 802.3u, IEEE 802.3x | |
Basic Function | Adopts WDM technology | |
Half/Full-Duplex transfer mode for FX port | ||
Full Duplex Flow Control (IEEE 802.3x) | ||
Half Duplex Flow Control (Backpressure) | ||
Link Fault Pass through and Far End Fault minimize the loss caused by link failure timely |
||
Extends fiber distance up to 20km | ||
Ports | 1 100M SC port | |
1 100M RJ45 port (Auto MDI/MDIX) | ||
WDM | TX | 1310nm |
RX | 1550nm | |
Network Media | 100BASE-T | UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) |
1000BASE-T | UTP category 6, 6a cable (maximum 150m) EIA/TIA-568 100Ω STP (maximum 100m) |
|
1000BASE-FX | Single-mod Fiber | |
LED Indicators | PWR, FDX/Col, Link/Act, SPD | |
Safety & Emission | FCC, CE | |
Dimensions (W*D*H) | 3.7*2.9*1.1 in. (94.5*73.0*27.0 mm) | |
Environment | Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40ᆦ~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing |
|
Power Supply | External Power Adapter |