Fast Ethernet Media converter
Single Mode Dual fiber
Description
The MT-200CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MT-200CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MT-200CS supports long wave (LX) laser specification at a full wire speed forwarding rate.
Features
- Auto negotiation of 10/100Mbps and auto MID/MID-X for TX port.
- Provide switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port.
- Link Fault Pass through and Far End Fault minimize the loss caused by link failure timely
- Extend fiber distance up to 20ï¼60km.
- Easy-to-view LED indicators provide status to monitor network activity easily.
- External power supply.
Specification:
| Standards and Protocols | IEEE 802.3, IEEE 802.3u, IEEE 802.3x | |
| Basic Function | Half/Full-Duplex transfer mode for FX port | |
| Full Duplex Flow Control (IEEE 802.3x) | ||
| Half Duplex Flow Control (Backpressure) | ||
| Link Fault Pass through and Far End Fault minimize the loss caused by link failure timely |
||
| Ports | 1 100M SC port | |
| 1 100M RJ45 port (Auto MDI/MDIX) | ||
| Network Media | 10BASE-T | UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) |
| 100BASE-T | UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) |
|
| 100BASE-FX | Single-mode Dual Fiber | |
| LED Indicators | PWR, FDX/Col, Link/Act, SPD | |
| Safety & Emission | FCC, CE | |
| Dimensions (W*D*H) | 3.7*2.9*1.1 in. (94.5*73.0*27.0 mm) | |
| Environment | Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing |
|
| Power Supply | External Power Adapte | |
Document
Picture
Downlaods