WDM Fast Ethernet Media Converter
Single Mode Single Fiber
Range: 40km
Description
The MT-131CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Adopting WDM technology, MT-131CS takes only one fiber cable to transmit and receive data, which will save half cabling cost for you. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MT-131CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MT-131CS supports long wave (LX) laser specification at a full wire speed forwarding rate. It works at 1550nm on transferring data and at 1310nm on receiving data. So the other end device to cooperate with the MT-131CS should work at 1310nm on transferring data and at 1550nm on receiving data. Another MT-Link‘s media converter MT-131CS is just one of the examples to cooperate with MT-131CS.
Other features of this module include the ability to be used as a stand alone device (no chassis required) or with MT-Link ‘s19´´ system chassis, Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, and front panel status LEDs. The MT-131CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 40 kilometers.
Features
- Auto negotiation of 10/100Mbps and auto MID/MID-X for TX port
- Provide switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port
- Link Fault Pass through and Far End Fault minimize the loss caused by link failure timely
- Adopts WDM technology, transmitting and receiving data on one single fiber
- Extend fiber distance up to 40-60km
- Easy-to-view LED indicators provide status to monitor network activity easily
- External power supply
Specification:
Standards and Protocols | IEEE 802.3, IEEE 802.3u, IEEE 802.3x | |
Basic Function | Adopts WDM technology | |
Half/Full-Duplex transfer mode for FX port | ||
Full Duplex Flow Control (IEEE 802.3x) | ||
Half Duplex Flow Control (Backpressure) | ||
Link Fault Pass through and Far End Fault minimize the loss caused by link failure timely |
||
Extends fiber distance up to 40km | ||
Ports | 1 100M SC port | |
1 100M RJ45 port (Auto MDI/MDIX) | ||
WDM | TX | 1550nm |
RX | 1310nm | |
Network Media | 10BASE-T | UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) |
100BASE-T | UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) |
|
100BASE-FX | Single-mod Fiber | |
LED Indicators | PWR, FDX/Col, Link/Act, SPD | |
Safety & Emission | FCC, CE | |
Dimensions (W*D*H) | 3.7*2.9*1.1 in. (94.5*73.0*27.0 mm) | |
Environment | Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing |
|
Power Supply | External Power Adapter |